Amb-OS Media AMR-100I Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 52

Amb-OS Media AMR-100I Скачать руководство пользователя страница 49

TSTOP

This command is similar to ALLSTOP, but it allows you stop a specific target from playing
regardless of what started it. Use this command with caution. It can be used to stop only the
left or the right channel. However, if the audio was started as stereo on the target
(AUDPLAY filename.mp2 ON T1), it will not stop the audio. If two programs are playing
separately on T1L and T1R, you can stop one or the other by specifying the appropriate
target (T1L or T1R). If T1R is targeted to stop, T1L will continue playing. The command to
stop T1 (no L or R parameter) will only stop the left channel.

Syntax: TSTOP T1

TSTOP T1L
TSTOP T1R

TMAP# Target

This commands allows you to change the

to another target. The defaults are listed in

the

section. A section under the

system statistics

shows the current mapping on the

AMR-100-I receiver. The target can be any one of seven targets:

T1 = Port 1 stereo
T1L = Port 1 mono – left side only
T1R = Port 1 mono – right side only
T2 = Port 2 stereo
T2L = Port 2 mono – left side only
T2R = Port 2 mono – right side only
None = No target – a file will NOT play

Seven TMAPs exist: TMAP1, TMAP2, TMAP3, TMAP4, TMAP5, TMAP6 and TMAP7.
TMAP7 is for

emergency broadcasts or ad hoc

Syntax: TMAP1 T1

TMAP1 T2L

TMAP7ARM

This command duplicates pressing the [BACK] button to arm the

emergency or ad hoc

program function. The “*” in the upper right of the front panel screen will come on when
issuing “TMAPARM7 ON” command. “TMAPARM OFF” will turn off the function and the
“*” on the front panel screen will be off.

Syntax: TMAP7ARM ON

TMAP7ARM OFF

TONE

This turns the internal tone generator on or off for testing purposes.

Syntax: TONE ON

TONE OFF

Rev. 1 – Firmware version 2.03

49

©

2012

«
...
47
48
49
50
51
...
»

Содержание AMR-100I





















































Отзывы:

Нет отзывов