HD Model: ST38021 5A (This is the model number of the OEM internal hard drive)
HD Size: 76319meg (This is the size of the OEM internal hard drive – approximately 80 GB)
*Audio Test
1. Press [ENTER] to start the test. It will generate two different tones (a lower tone on the
left channel and a higher tone on the right channel). The display will say:
2. Press any key to exit the test (as described on the display)
Preparing for Audio Test
Playing the Audio Test
DATE MENU
Only three options exist on the Date Menu:
Date and time
Zone
After connecting to the Internet, the AMR-100-I
will sync its time to UTC. The server sends GMT
and the receiver changes the hours to reflect the
Zone and Daylight Saving Time setting.
After the time has synced, you
CANNOT
change the date and time. When you enter the edit
mode in this menu, you will be taken to the Zone setting and
NOT
be able to change the date
or time. If the month is highlighted when you press [ENTER], then you either have entered
the menu before the time has synced.
Date Time:
The receiver wakes up based on the time setting it had during testing at the factory.
You may change this only before the AMR-100-I syncs its time.
Time Zone:
Zone: Eastern (default)
The zone can be set to any time zone. When changing the Time Zone setting, the hour
display will change automatically to reflect the new time zone. Only eight
zones are named. The other zones are reflected in hours to or from GMT (GMT-1,
GMT+12, etc.). The named zones are
Atlantic (-4 GMT)
Pacific (-8 GMT)
Eastern (-5 GMT)
Alaska (-9 GMT)
Central (-6 GMT)
Hawaii (-10 GMT)
Mountain (-7 GMT)
Rev. 1 – Firmware version 2.03
33
©
2012
Date Time
Zone
Daylight Saving Time
DATE