General safety instructions
ZA-M BAG0040.8 09.15
9
2
General safety instructions
This section contains important information on safe operation of the
machine.
2.1
Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a
basic requirement for safe handling and fault-free machine operation.
Obligations of the operator
The operator is obliged only to let those people work with/on the ma-
chine who
•
Are aware of the basic workplace safety information and acci-
dent prevention regulations.
•
Have been trained in working with/on the machine.
•
Have read and understood this operating manual.
The operator is obliged
•
To keep all the warning pictograms on the machine in a legible
state.
•
To replace damaged warning pictograms.
If you still have queries, please contact the manufacturer.
Obligations of the user
Before starting work, anyone charged with working with/on the ma-
chine is obliged
•
To comply with the basic workplace safety instructions and acci-
dent prevention regulations.
•
To read and follow the "General safety information" section of
this operating manual.
•
To read the "Warning pictograms and other signs on the ma-
chine" section of this operating manual and to follow the safety
instructions of the warning pictograms when operating the ma-
chine.
•
To get to know the machine.
•
To read the sections of this operating manual, important for car-
rying out your work.
If the user discovers that a function is not working properly, then they
must eliminate this fault immediately. If this is not the task of the user
or if the user does not possess the appropriate technical knowledge,
then they should report this fault to their superior (operator).
