General safety instructions
ZA-M BAG0040.8 09.15
29
2.16.4
Fertiliser spreader operation
•
Stay clear of the working area! Danger from flying fertiliser parti-
cles. Direct persons away from the throwing range of the fertilis-
er spreader. Do not walk or stand close to rotating spreading
discs.
•
Fill the fertiliser spreader only when the tractor engine is shut off,
the ignition key is pulled and the sliders are closed.
•
Do not place any foreign objects in the hopper.
•
While carrying out the spread rate check, beware of danger
points from rotating machine parts.
•
Never unhitch a fertiliser spreader or roll it while it is full (tipping
hazard).
•
For boundary spreading at field edges, bodies of water or roads,
use boundary spreading devices.
•
Before each use, ensure that the attachment parts are properly
fitted, particularly those for attaching the spreading discs and
spreading vanes.
2.16.5 Cleaning, maintenance and repairs
•
Only carry out cleaning, maintenance and repair work on the
machine when:
ο
The drive is switched off
ο
The tractor engine has come to a complete stop
ο
The ignition key has been removed
ο
The machine connector has been removed from the on-
board computer
•
Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
•
Secure the raise machine and/or raised machine parts against
unintentional falling, before cleaning, maintaining or repairing the
machine.
•
When replacing work tools with blades, use suitable tools and
gloves.
•
Dispose of oils, greases and filters in the appropriate way.
•
Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
•
Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE. This is ensured through the use
of original AMAZONE spare parts.
