Construction and function of the basic machine
5.5
Air pressure brake system
Keeping to the service interval is essential for proper functioning of
the dual circuit service brake system.
Fig. 31
/...
1. Braking force regulator with hand lever for
adjusting the braking force manually. The
braking force is set in 4 stages, depending
on the load status of the trailed sprayer.
○
Sprayer filled
= full load
○
Sprayer partly filled = ¾, ½ , ¼
ο
Sprayer empty
= empty
(2) Release valve with actuator button (3)
(3) Actuator button;
○
press in until it stops and the service
brake system releases, e.g. for shunt-
ing the uncoupled trailed sprayer.
○
pull it out as far as it will go, and the
trailed sprayer is braked again by the
supply pressure coming from the air
reservoir.
Fig. 31
Fig. 32/...
(1) Air reservoir
(2) Drainage valve for condensate.
(3) Test connection
Fig. 32
•
Dual-circuit pneumatic braking system
Fig. 33/...
(1) Hose coupling on brake line (yellow)
(2) Hose coupling on supply line (red)
Fig. 33
UX Super
BAG0054.10 11.16
69