Construction and function of the basic machine
5.29
Control terminal
The following are performed via the control ter-
minal:
•
input of implement-specific data.
•
input of job-related data.
•
control of the field sprayer to change the
spray rate used in spraying operation.
•
the operation of all functions on the sprayer
boom.
•
the operation of special functions.
•
the monitoring of the field sprayer during
spraying operation.
The control terminal controls a job computer.
Here, the job computer receives all necessary
information and manages the area-based regula-
tion of the spray rate [l/ha] depending on the
quantity (target quantity) entered and the current
operational speed [km/h].
Fig. 87
See operating manual for software
ISOBUS.
5.30
AMASPRAY
+
The
AMASPRAY
+
can be used on the field
sprayer as a fully automatic control device. The
device carries out area-based regulation of the
spread rate, depending on the current speed and
working width.
Current spread rate, speed, worked area, total
area, quantity applied and overall spread rate,
working time and distance travelled are continu-
ously detected.
Fig. 88
See also
AMASPRAY
+
operat-
ing manual.
102
UX Super
BAG0054.10 11.16