manualshive.com logo in svg

Amazone Tyrok 400, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Tyrok 400 Скачать руководство пользователя страница 37

Working width of the plough

The working width of the plough corresponds to
the field width that is worked in one pass.

Example for 6-share plough:

Working width = 5 x working width of one plough body
+ front furrow width

CMS-I-00002676

4.10 Shear bolt overload safety

Each plough body is protected against overload with
a shear bolt.

In the event of an overload, the shear bolt shears off.

CMS-I-00004970

4.11 Hydraulic overload safety

With the overload safety, the plough bodies deflect
in case of overload. Each plough body can deflect
upwards or to the side individually. The pressurised
hydraulic system guides the plough body back into
working position.

The tripping force is adjusted for different soils
through the hydraulic pressure.

A shear bolt serves as an additional overload safety.

The hydraulic overload safety is available in two
versions:

The overload safety with central adjustment of the
tripping force

The overload safety with decentralised adjustment
of the tripping force

CMS-T-00006871-A.1

CMS-T-00006507-B.1

4 | Product description

Shear bolt overload safety 

MG7196-EN-GB | G.1 | 26.07.2022 | © AMAZONE

31

Содержание Tyrok 400













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды