manualshive.com logo in svg

Amazone Profihopper 1500 SmartLine, Руководство по эксплуатации

Поделиться
Скачать
Amazone Profihopper 1500 SmartLine Скачать руководство пользователя страница 76

6.2

Adjusting the Deluxe driver's seat

6.2.1 Selecting the longitudinal setting

1. Pull the lever 

1

 up and hold it.

2. Push the seat into the desired position.

3. Let go of the lever.

The lever engages perceptibly and audibly. The
seat is locked in the set position.

4. Check that the seat is firmly locked.

1

CMS-I-00002335

6.2.2 Adjusting the backrest

1. Pull the lever 

1

 up and hold it.

2. Move the backrest to the desired position.

3. Let go of the lever.

The lever engages perceptibly and audibly. The
backrest is locked in the desired position.

4.

To fold the backrest completely to the front,

Fold up the armrests.

5. Pull on the lever and hold it.

6. Fold the backrest completely to the front.

1

CMS-I-00002337

CMS-T-00002551-B.1

CMS-T-00002549-B.1

CMS-T-00002556-B.1

6 | Preparing the machine

Adjusting the Deluxe driver's seat 

MG6399-EN-II | D.1 | 11.03.2020

70

Содержание Profihopper 1500 SmartLine



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды