manualshive.com logo in svg

Amazone Profihopper 1500 SmartLine, Руководство по эксплуатации

Поделиться
Скачать
Amazone Profihopper 1500 SmartLine Скачать руководство пользователя страница 143

Parking the machine

10

10.1

Parking the implement after operation

1. Completely empty the grass collector and lower it

completely.

2. Completely lower the cutting deck.

IMPORTANT

 

Fire hazard

Remove grass residues in the area of the
engine and exhaust system.

3. Clean the machine.

10.2

Preparing the machine for longer periods of standstill or
overwintering

1. Completely empty the grass collector.

2. Clean the machine.

3. Grease all lubrication points.

4. Empty the fuel tank.

5. Disconnect and remove the battery.

6. Store the battery in a dry and frost-free place.

7. Check the condition of the drive belts.

8. If necessary, have the drive belts replaced by a

qualified specialist workshop.

CMS-T-00002695-B.1

CMS-T-00003942-A.1

CMS-T-00002811-B.1

10 | Parking the machine

 

MG6399-EN-II | D.1 | 11.03.2020

137

Содержание Profihopper 1500 SmartLine



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды