Amazone Precea 6000-2, Оригинальное руководство по эксплуатации, Страница: 90 / 254

6.4.9.6 Adjusting the track marker for 6.00 m working width
1. Move the track marker mount
7
on the
implement section
5
to the desired position.
2. Install the bolts
6
.
3. Install the nuts 4 .
4. Release the clamp connection 2 .
5.
To adjust the track marker length,
move the shaft
3
of the track marker disc
1
to
the desired position.
6.
To adjust the pitch of the track marker disc,
turn the shaft of the track marker disc to the
desired position.
CMS-I-00003874
6.4.10 Preparing the wheel mark eradicator for operation
6.4.10.1 Adjusting the working depth of the wheel mark eradicators
IMPORTANT
Increased wear of the wheel mark
eradicator bracket
When the overload safety is triggered at
short intervals,
reduce the working depth.
Change to a wheel mark eradicator
coulter that is easy to pull.
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-T-00005441-B.1
CMS-T-00001816-C.1
CMS-T-00001486-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021 84