9.
Empty the calibration bucket.
10.
To prevent soiling of the calibration buckets,
slide the calibration bucket
1
under the metering
unit with the opening facing down.
11. Swivel up the lock
2
and close it.
12.
To move the calibration flap lever into working
position,
press and hold the lock button and push it
upwards.
13.
To move the bottom flap lever into working
position,
press and hold the lock button and push it
upwards.
CMS-I-00001932
9.5 Emptying the micropellet hopper
1.
Close the the sliding shutter
1
on the
micropellet hopper.
CMS-I-00002586
2.
Move the switchover flap
1
to position
A
.
CMS-I-00002580
CMS-T-00003603-A.1
9 | Parking the machine
Emptying the micropellet hopper
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
187
