10.1.6 Checking and replacing the rigid cutting disc on the PreTeC mulch seeding coulter
INTERVAL
1.
Determine the cutting disc diameter.
2.
If the diameter of the cutting discs is less than
320 mm,
replace the worn cutting discs
1
.
3.
Remove the bolts
2
.
4.
Replace worn cutting discs with new cutting
discs.
5.
Install the bolts.
1
2
CMS-I-00005361
10.1.7 Checking and replacing the cutting disc on the FerTeC Twin coulter
INTERVAL
Every 100 operating hours
or
Every 3 months
1.
Determine the cutting disc diameter.
2.
If the diameter of the cutting disc is smaller
than 340 mm,
replace the cutting disc.
3.
Remove the dust caps
3
.
4.
Unscrew and remove the central bolts
4
.
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
5.
Remove the worn cutting disc
2
.
6.
Unscrew and remove the bolts on the bearing
seat
1
.
3
4
5
1
2
220 Nm
32 Nm
CMS-I-00002043
CMS-T-00007650-C.1
CMS-T-00002379-E.1
10 | Repairing the machine
Maintaining the machine
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
154
