Amazone KE 3002, Оригинальное руководство по эксплуатации

Страница: 67 / 120

6.5.7.3 Adjusting the track marker length
1. Loosen the bolts
1
with the universal operating
tool
2. Pull out the track marker disc
2
until the desired
distance is reached.
3. Tighten the bolts with the universal operating tool.
4. Make the same setting for the opposite side of the
implement.
5. After 5 hours of operation, check the bolt
connection for tight fit.
-
+
1 2
CMS-I-00001074
6.5.7.4 Adjusting the track marker intensity
1. loosen the bolts
1
with the universal operating
tool.
Work application Pitch
Light soils
Reduce
-
About parallel to the direction
of travel
Heavy soils
Increase
+
More on-grip to the direction of
travel
2. Move the track marker disc to the desired position
by turning the track marker axis
2
.
3. Tighten the bolts with the universal operating tool.
4. Make the same setting for the opposite side of the
implement.
5. After 5 hours of operation, check the bolt
connection for tight fit.
-
+
1 2
CMS-I-00001077
CMS-T-00001487-C.1
CMS-T-00001726-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 61