Amazone KE 3002, Оригинальное руководство по эксплуатации

Страница: 66 / 120

1. Put the "yellow" tractor control unit in the neutral
position.
2. Press the track marker
1
against the rubber
block.
The transport lock
2
is relieved.
3. Swivel back the transport lock.
4.
The track markers are guided into the parking
position by the spring pressure.
Slowly swivel the track markers into the parking
position.
5. Repeat the procedure for the opposite side of the
implement.
6. Put the "yellow" tractor control unit in float
position.
The track marker folds into working position.
7.
If the wrong track marker is folded into working
position,
actuate the "yellow" tractor control unit.
The track marker is folded up.
8. Put the "yellow" tractor control unit in float
position again.
The track marker on the opposite side folds into
working position.
CMS-I-00000952
6.5.7.2 Determining the track marker length
Working width of the
implement [m]
Distance A [m]
2.5 2.5
3.0 3.0
3.5 3.5
4.0 4.0
Read the distance
A
from the centre of the
implement to the track marker disc from the table.
A
CMS-I-00003078
CMS-T-00004725-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 60