Amazone KE 3002, Оригинальное руководство по эксплуатации

Страница: 65 / 120

11. Tighten the bolts.
12. Make the same setting for the opposite side of the
implement.
13. After 5 hours of operation, check the bolt
connection for tight fit.
6.5.6 Adjusting the scraper to the roller
The scrapers on the roller are set at the factory. The
scrapers can be adapted to the working conditions.
1. Loosen the bolt
1
under the scraper.
2. Move the scraper
2
in the elongated slot.
3.
To check the distance,
rotate the roller
2
.
4. Tighten the bolt.
5. Make the same setting for all scrapers.
NOTE
Permitted distances between the roller
element and scraper:
Wedge ring roller: 10 mm to 15 mm
Tooth packer roller and trapeze ring roller: 0.5
mm to 4 mm
1
2
CMS-I-00000933
6.5.7 Preparing the track marker for operation
6.5.7.1 Unfolding the track markers
The hydraulically actuated track markers produce
alternating marks. This mark serves as an reference
to the tractor driver for driving the next bout after
turning at the headland. The length and pitch of the
track markers are adjustable.
CMS-T-00001534-B.1
CMS-T-00001725-D.1
CMS-T-00001561-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 59