Amazone Hektor, Руководство по эксплуатации

Страница: 27 / 66

Preparations on the tractor and plough
4.1.7 Table
Actual value according to
calculation Permissible value
according to tractor
operating manual Double the
permissible load
capacity (two tyres)
Minimum ballast front /
rear
/
kg
-- --
Total weight kg
≤
kg
--
Front axle load kg
≤
kg
≤
kg
Rear axle load kg
≤
kg
≤
kg
•
You can find the permissible values for the total tractor weight,
axle loads and load capacities in the tractor registration papers.
•
The actually calculated values must be less than or equal to (
≤
)
the permissible values.
WARNING
Risk of crushing, cutting, being caught or drawn in, or impact
through insufficient stability and insufficient tractor steering and
brake power.
It is forbidden to couple the machine to the tractor used as the basis
for calculation, if
•
one of the actual, calculated values is greater than the
permissible value.
•
there is no front ballast (if required) attached to the tractor for the
minimum front ballast (G
V min
).
•
You must use a front weight, which is equal to at least the
required minimum front ballast (G
V min
).
Hektor BAG0186.1 07.19 27