Amazone Hektor, Руководство по эксплуатации

Страница: 15 / 66

General safety instructions
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through the failure of support parts.
It is strictly forbidden to
•
drill holes in the frame or on the running gear.
•
increase the size of existing holes on the frame or the running gear.
•
weld on load-bearing parts.
2.10.1 Spare and wear parts and aids
Immediately replace any implement parts which are not in a perfect
state.
Only use genuine AMAZONE spare and wear parts, or those
approved by AMAZONEN-WERKE, so that the operating permit
remains valid according to the national and international regulations. If
you use wear and spare parts from third parties, there is no guarantee
that they have been designed and manufactured in such a way as to
meet the requirements placed on them.
AMAZONEN-WERKE shall accept no liability for damage caused by
the use of non-approved spare and wear parts or aids.
2.11 Cleaning and disposal
Handle and dispose of any materials used carefully, in particular
•
when carrying out work on lubrication systems and equipment
and
•
when cleaning using solvents.
2.12 User workstation
The implement may be operated by only one person sitting in the
driver's seat of the tractor.
Hektor BAG0186.1 07.19 15