manualshive.com logo in svg

Amazone GHS 1500 Drive SmartCut, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone GHS 1500 Drive SmartCut Скачать руководство пользователя страница 111

 

IMPORTANT 

 

Risk of damage to the rotor

When the cutting deck is lowered and
switched off,

do not move the machine.

 

1.

Switch off the PTO shaft drive on the tractor.

2.

To raise the cutting deck and the front
implement,

press the control button 

1

 at the top.

1

CMS-I-00003383

7.2.3 Mulching

REQUIREMENTS

The setting for mulching has been made.

Start and stop mulching just like mowing.

7.2.4 Scarifying

REQUIREMENTS

Scarifying blades are installed.

 

IMPORTANT 

 

Machine damage due to large amount of
soil

When scarifying, only fill the grass
collector halfway when there is a large
amount of soil.
Observe the maximum permissible total
weight according to the technical data.

 

Start and stop scarifying just like mowing.

CMS-T-00005903-A.1

CMS-T-00005904-A.1

7 | Using the machine

Using the implement with electro-hydraulic controls 

MG6212-EN-II | C.1 | 12.04.2021

105

Содержание GHS 1500 Drive SmartCut











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды