6.2 Coupling the implement
6.2.1 Preparing the 3-point mounting frame
6.2.1.1 Attach the ball sleeves for mounting category 2
Mounting category 2
measurements
Diameter
A
25 mm
B
28 mm
1.
Select the top link pin
1
and lower link step pin
2
for mounting category 2.
A
B
1
2
CMS-I-00001816
For the top link pin
1
of mounting category 2,
adapter sleeves
2
are required.
2.
Insert the top link pin together with the adapter
sleeve in one of the holes.
3.
Fit the top link pins with ball sleeves
4
.
4.
Secure the top link pin with a linch pin
3
.
1
1
3
2
2
4
CMS-I-00001221
5.
Insert the lower link step pin
2
into the mount
from the outside.
6.
Equip the lower link step pins with ball sleeves
1
.
7.
Secure the lower link step pin
2
with a linch pin.
1
2
3
CMS-I-00002453
CMS-T-00003183-C.1
CMS-T-00003187-B.1
CMS-T-00003188-B.1
6 | Preparing the machine
Coupling the implement
MG6214-EN-II | E.1 | 17.05.2021
41
