Amazone Centaya 3000 Special, Оригинальное руководство по эксплуатации

Страница: 85 / 160

6.4.16 Using the loading board steps
REQUIREMENTS
The seed drill is coupled to the soil tillage
implement
1. Hold the steps
2
in position.
2.
To unfold the steps,
release the transport lock
1
.
3. Swivel the steps down.
4. Climb onto the loading board
3
using the steps.
5. After use, swivel the steps up and put them in the
parking position.
The transport lock locks automatically.
6. Check whether the transport lock is properly
locked.
CMS-I-00004942
6.4.17 Preparing the metering unit for operation
6.4.17.1 Putting the metering unit into operation
If work is started without calibration,
Close the calibration flap
1
.
1
CMS-I-00006791
CMS-T-00007020-C.1
CMS-T-00009826-A.1
CMS-T-00010369-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE 79