Amazone Cenius 3003 Скачать руководство пользователя страница 64

Страница: 64 / 80

Transportation

DANGER

•

During transportation, follow the instructions given in the
section "Safety instructions for the operator", page 24.

•

Both vehicle owner and operator are responsible for observ-
ing to the national road traffic regulations!

•

Check the proper function of the light system!

•

The tractor lights must not be hidden during transport of the
attachment.

•

The transport width of 3 m must not be exceeded!

•

When driving on the road with the machine raised, the oper-
ating levers on the tractor must be locked to prevent unin-
tentional lowering and folding out!

Cenius 3003 / 3503:

DANGER

Risk of injury with overwidth transport.

•

Push in and lock the outer side discs/side closers!

•

Duckfoot coulter/wing coulter: mount the outer tine receptacle far
enough to the inside so that the permissible transport width is
maintained.

Rear harrow (optional)

Install the transport safety bar.

Cenius 03 BAG0144.5 10.19

Содержание Cenius 3003

















































































Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды

Amazone Cenius 3003, Руководство по эксплуатации

Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды