Amazone Cenius 3003 Скачать руководство пользователя страница 59

Страница: 59 / 80

Coupling and uncoupling the machine

7.2

Uncoupling the machine

When uncoupling the machine, there must always be enough space
in front of the machine, so that you can align the tractor with the ma-
chine if necessary.

1. Park the implement on boards to protect the tines.

2. Always inspect the machine for obvious signs of damage during

uncoupling. Observe here the chapter "Obligations of the user",
page 8.

3. Uncouple the machine from the tractor as follows:

3.1 Relieve the top links.

3.2 Unlock and uncouple the upper link hooks from the tractor

seat.

3.3 Relieve the lower links.

3.4 Unlock and uncouple the lower link hooks from the tractor

seat.

3.5 Drive the tractor approx. 25 cm forwards.

→

This will allow more room between tractor and machine and

give better access for uncoupling the supply lines.

3.6 Secure the tractor against unintentional starting and rolling

away, see chapter "Securing the tractor against uninten-
tional starting and rolling away", from page 55.

3.7 Disconnect the hydraulic hoses, see chapter "Disconnect-

ing hydraulic hoses" from page 48.

3.8 Disconnect the light system.

Cenius 03 BAG0144.5 10.19

Содержание Cenius 3003

















































































Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды

Amazone Cenius 3003, Руководство по эксплуатации

Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды