Amazone Cenius 3003 Скачать руководство пользователя страница 48

Страница: 48 / 80

Structure and function

5.9.1

Connecting hydraulic hoses

WARNING

Danger from incorrect hydraulic functions if the hydraulic hoses
are connected incorrectly!

When coupling the hydraulic hose, observe the coloured marks on
the hydraulic connectors. See "Hydraulic connections, page 47.

•

Observe the maximum admissible working pressure of 210 bar.

•

Check the compatibility of the hydraulic fluids before connecting
the machine to the hydraulic system of your tractor.

•

Do not mix mineral oils with bio-oils..

•

Push the hydraulic plug(s) into the hydraulic sockets until you
feel them lock.

•

Check the couplings of the hydraulic hoses for a correct, tight
seat.

•

Connected hydraulic hoses

Must give without tension, bending or rubbing on all move-
ments when travelling round corners.

May not scour other parts.

1. Move the control lever of the spool valve on the tractor to float

position (neutral position).

2. Clean the hydraulic connectors of the hydraulic hoses before

connecting the hydraulic hoses to the tractor.

3. Connect the hydraulic hoses to the tractor control units.

5.9.2

Disconnecting hydraulic hoses

1. Move the control lever of the tractor control unit to float position

(neutral position).

2. Release the hydraulic connectors from the hydraulic sockets.

3. Protect the hydraulic sockets from soiling by fitting the dust

caps.

4. Hook the hydraulic connectors into the connector holders.

Cenius 03 BAG0144.5 10.19

Содержание Cenius 3003

















































































Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды

Amazone Cenius 3003, Руководство по эксплуатации

Результаты поиска

Содержание Cenius 3003

Отзывы:

Бренды по названию

Популярные бренды