Amazone Cenio 3000, Оригинальное руководство по эксплуатации

Страница: 52 / 84

6.3.1.2 Hydraulic adjustment of the coulter working depth
NOTE
If a uniform working depth cannot be adjusted, the
hydraulic cylinders must be synchronised.
1.
To synchronise the hydraulic cylinders,
completely extend the hydraulic cylinders with the
"green" tractor control unit.
2. Hold the "green" tractor control unit for 10
seconds.
The hydraulic cylinders will be synchronised.
The arrow
1
on the scale
2
shows the set working
depth.
NOTE
The scale value only serves for orientation. The
scale value does not represent the working depth
in centimetres.
3. Adjust the working depth hydraulically using the
"green" tractor control unit.
1
2
CMS-I-00002447
6.3.2 Adjusting the working depth of the levelling
6.3.2.1 Manual adjustment of the levelling working depth
1. Slightly raise the implement.
2. Move the setting lever
1
from parking position.
3. Position the setting lever in the group of holes
with the pin
2
.
4. Slightly lift the levelling with the setting lever and
pull the pin
3
out of the group of holes.
5.
To change the working depth,
swivel the setting lever up or down.
6. Insert the pin
3
in the group of holes.
1
2
3
CMS-I-00003060
CMS-T-00005119-C.1
CMS-T-00004166-E.1
CMS-T-00004167-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6806-EN-GB | Q.1 | 26.07.2022 | © AMAZONE 48