CMS-I-00003277
IMPORTANT
Damage due to the side guide plates
being set too deep
Set the side guide plates at a distance of
at least 30 mm from the ground.
1.
Slightly raise the implement.
2.
Loosen the bolts on the side guide plates.
3.
Adjust the height and longitudinal spacing of the
side guide plates.
4.
Tighten the bolts.
5.
Check the setting when operating the implement.
6.3.2.7 Adjusting the trailing elements
1.
Take the setting lever
1
from the holder.
CMS-I-00002241
CMS-T-00002429-E.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
45
