6.3.2.2 Hydraulic adjustment of the working depth of the discs
NOTE
If a uniform working depth cannot be adjusted, the
hydraulic cylinders must be synchronised.
1.
To synchronise the hydraulic cylinders,
completely extend the hydraulic cylinders with the
"green" tractor control unit.
2.
Hold the "green" tractor control unit for 10
seconds.
The hydraulic cylinders will be synchronised.
The arrow
1
on the scale
2
shows the set working
depth.
NOTE
The scale value only serves for orientation. The
scale value does not represent the working depth
in centimetres.
3.
Adjust the working depth hydraulically using the
"green" tractor control unit.
1
2
CMS-I-00002447
6.3.2.3 Adjusting the working depth of the side discs
The working depth of the side discs is adjusted to
prevent the formation of soil ridges during operation.
1.
Raise the implement.
2.
Loosen the bolt
1
.
The bearing journal and the hub of the side disc
2
serve as handles.
3.
Move the side disc up or down.
4.
Tighten the bolts.
1
CMS-I-00004463
CMS-T-00000271-D.1
CMS-T-00006268-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6158-EN-II | H.1 | 30.04.2021
42
