conditions. One set of ballast weights consists of 4
elements, each with a weight of 25 kg.
1.
Screw on the bracket
1
for the ballast weights
with the clamp
2
at the centre of the rear frame
carrier.
CMS-I-00000643
2.
Put two ballast weights
1
on each bracket.
3.
Screw two ballast weights together respectively.
CMS-I-00000533
6.4.4 Adjusting the scraper to the roller
The scrapers on the roller are set at the factory. The
scrapers can be adapted to the working conditions.
NOTE
Permitted distances
A
between the roller
element and scraper:
Wedge ring roller: 12 mm ± 2 mm
Wedge ring roller with matrix tyre profile: 13
mm ± 2 mm
Tooth packer roller: at least 1 mm
A
CMS-I-00002071
CMS-T-00000076-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6828-EN-II | N.1 | 13.08.2021
54
