1.
Take the lever
1
out of the transport lock
2
and pull it up.
2
1
CMS-I-00004673
2.
To increase the exact following harrow
pressure,
remove the linch pin
2
and insert it in a higher
hole under the stop
1
or
To reduce the exact following harrow pressure,
remove the linch pin
2
and insert it in a lower
hole under the stop
1
.
3.
Relieve the lever and fasten it in the transport
lock.
4.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
1
CMS-I-00004671
6.3.12.5 Adjusting the exact following harrow pressure hydraulically
The exact following harrow pressure must be adjusted
such that all seed rows are evenly covered with earth.
On heavy soils, the pressure must be higher than on
light soils.
To make adjustments, the minimum pressure and the
maximum pressure of the exact following harrow must
first be determined by mechanical pegging.
CMS-T-00006338-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
63
