9.3.5 The exact following harrow does not cover the seed sufficiently with fine soil
On seed drills without exact following harrow lift, the overload safety is triggered.
1.
To position the exact following harrow
correctly,
raise the implement.
2.
Remove the remainders of the torn shear bolt
1
.
3.
Take out one of the spare shear bolts
2
.
4.
Install the spare shear bolt with washers and nut
at position
1
.
1
2
CMS-I-00004678
The harrow tines are worn.
1.
Remove the nuts
1
.
2.
Remove the bolts
5
and plates
2
.
3.
Replace the harrow tines
3
and
4
.
4.
Install the plates and bolts.
5.
Install the nuts and tighten them.
3
2
1
4
2
5
CMS-I-00004677
CMS-T-00006600-A.1
9 | Repairing the machine
Eliminating faults
MG6545-EN-II | B.1 | 22.07.2021
104
