Amazone AMAPAD, Руководство по эксплуатации

Страница: 118 / 237

TROUBLESHOOTING
The job cannot be started?
The conditions for starting the job have not be
fulfilled. The "Start job status" window will be
shown. A red status display means that these
conditions have not been fulfilled.
1.
Red status display for the "GPS received":
Check whether the GPS receiver is properly
connected and selected.
2.
Red status display for " Job selected ":
Select the job.
3.
Red status display for " Console ready ":
Call up further information with and
rectify the displayed errors.
4.
Red status display for " Implement loaded ":
Select the implement.
5.
Red status display for " Vehicle loaded ":
Select the vehicle.
6.
Red status display for " ECU synchronised ":
Reconnect the implement.
Interrupting a job
When the job is interrupted, the application is stopped
and job data is no longer recorded.
1. In the job menu, tap on .
2. Interrupt the job with .
The button changes into the button.
6
Creating a new job
To edit a field, a job is required. When starting a job, the
application will be started and the job total values will be
recorded.
006326
001908
I | Managing jobs | Creating a new job
MG5574-
EN
-II | B.1 | 25.10.2016 116