B0775YFK36, B07763W5NX, B07762Z897, B088XXNCMB
Modern Standard Toilet Paper Holder
Porte-papier Toilette Standard, Style Moderne
Moderner Standard-Toilettenpapierhalter
Portarotolo Standard Moderno
Portarrollos Moderno Para Papel Higiénico Estándar
Moderne Standaard WC-Papierhouder
モダーンスタンダードトイレットペーパーホルダー
EN
Warranty Information
To obtain a copy of the warranty for this product:
US: amazon.com/AmazonBasics/Warranty
UK: amazon.co.uk/basics-warranty
US: +1-866-216-1072 / UK: +44 (0) 800-279-7234
Feedback and Help
Love it? Hate it? Let us know with a customer review.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
1
2
3
5
Caution
This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children.
• Make Sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation, please
contact a professional installer for assistance.
Tape your mounting template to the wall covering your desired location.
Ensure that the template is straight by aligning a level with the center
line of the template.
Step 1: Determine where you would like to mount your bathroom hardware fixture
by placing it on the wall. Mark your location with tape or a pencil. Make
sure that both ends of the fixture are secured to the towel bar.
Step 2: Using a drill and 1/4" (6.35 mm) drill bit, drill two vertical holes for each
mounting bracket in the location specified on the template paper.
Step 3: Remove mounting template from the wall and insert plastic drywall
anchors into all 4 drilled holes. Lightly tap with hammer until flush with wall.
Step 4: Position the mounting brackets against anchor holes and thread screws
until secure.
Step 5: Using a 1/8" (3.3 mm) slotted screwdriver, loosen the metal set screw located
at the base of each fixture. Loosen screw until fixture is able to rest flush over
mounting bracket.
Step 6: Place fully-assembled fixture overtop the mounting bracket with set screws
facing down. With the fixture resting on the wall, use 1/8" (3.3 mm) slotted
screwdriver again to tighten the fixture onto the mounting bracket.
Maximum load: 11 lbs (5 kg).
WARNING
1/4" (6.35 mm)
1/8" (3.3 mm)
4
7
6
Step 7: Make sure the fixture is secured to the wall by gently moving both posts
from side to side.