Amaquest Computer CTL-9800 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 34

Amaquest Computer CTL-9800 Скачать руководство пользователя страница 8

CTL-9800/CTL-9805 User’s Manual

4

the CD/DVD controller. (Make sure the colored end of the cable aligned
with the number "1" printed on the board besides the SCSI connector.)

3. Connect the other ends of the SCSI cable to the CD-ROM/CD-

ROM/DVD-ROM drive(s). (Check the alignment of the colored end of
the cable with the number "1" indicated on the drives.)

4. Set a SCSI ID for each CD-ROM/DVD-ROM drive, make sure that

each has a unique ID, from 0~6. Refer to the CD-ROM/DVD-ROM
drive manual for detail instruction. The SCSI ID can be the same for two
drives only when the drives are located separately on two SCSI channels.

5. Terminate the last CD-ROM/DVD-ROM drive of the chain for each

channel, do not terminate the rest. Example, if all SCSI ID are used on a
channel, 0~6, terminate the drive with SCSI ID 6.

6. Connect the controller to the network using the network interface port.

Connect the 100BASE-TX network cable to the RJ-45 network
connector.

7. Switch on the CD/DVD Controller. The LED on the face panel starts

blinking after the system software initializes itself. The CD/DVD
Controller is now ready, please refer to the TCP/IP setup for network
configuration.

If any problem is encountered during the installation, please contact your local
dealer for assistance.

NOTE:

The CD/DVD Controller needs to be shut down before any new drive can

be added. Do not tempt to add any devices when the Controller is still powered on.

«
...
6
7
8
9
10
...
»

Содержание CTL-9800



































Отзывы:

Нет отзывов