Amano Time Guardian FRT-40, Руководство пользователя, Страница: 63 / 93

Page 2-48 FPT-40 Fingerprint Terminal Installation & Operation Guide
3. Once the correct IP address is entered, press OK to save, or ESC to
exit with the default IP address [192.168.1.201].
Log Options Menu
Use the Log Opt menu at the terminal to:
x
Alm SuperLog: The default is "99". The range is 0 to 99. When the
supervisor capacity log numerical value is reached, an alarm will
sound to automatically indicate that the logs are full.
x
Alm AttLog: The default is "99". The range is 0 to 99. When the
attendance log capacity numerical value is reached, an alarm will
sound to automatically indicate that the logs are full.
x
ReCheck Min: The default is "0". Each unit = a minute, i.e., 2 = 2
minutes. This feature is dissabled when set to 0. Recommended
setting is 1 or 2 minutes. This feature provides repunch protection.
For example, when set to 1 minute, if an employee punches multiple
times at the terminal within the 1 minute, only the first punch will be
recorded in flash memory. All verified additional punches within the
ReCheck Min setting will be follwed by the voice prompt, "
Punch
accepted….thank you ".
To set Log Options:
1. Press the Menu button and select Options (see figure).
Menu
User Manage
Options
Sys Info
Figure 2-114 Select Options
2. Press OK to display the Options menu and select Log Options
(see Figure 2-115 ).
Options
Power Mng
Comm Opt
Log Opt
Figure 2-115 Select Log Opt Menu