Amano Time Guardian FRT-40, Руководство пользователя, Страница: 21 / 93

Page 2-6 FPT-40 Fingerprint Terminal Installation & Operation Guide
Punching with a Fingerprint (FP) and Password (Pwd)
1. From the Welcome screen either place your finger on the sensor
or
enter your assigned User ID using the keypad.
2. Follow the on screen prompt to remove finger (see figure)
or
input
your password.
Figure 2-11 Remove Finger
3. Upon verification, the screen will display your Name, User ID, and
the confirmation " Verified. " with the voice prompt " Thank you "
followed by the momentary display of your hours worked for the
active pay period.
Note: The advantage of being enrolled as a user with a fingerprint
template and password is that you can use either method to
punch. This provides an automatic backup should you encounter
any problems with fingerprint validation. Therefore, the first
method used and accepted is the only method you need to
validate a punch.
Enrolling Users at the FPT-40 Terminal
After installing the FPT-40 Fingerprint terminal and powering on, you
may begin enrolling users. If this is the first enrollment in a new or empty
system, everyone will be able to enroll. However, if there any users with
privileges already setup in the system, you will have to be enrolled by a
user with privileges. The FPT-40 fingerprint reader provides the following
three methods for enrollement; fingerprint, password, or fingerprint and
password [in this instance the 1
st
method submitted and accepted is
used].