manualshive.com logo in svg

Amano Time Guardian FRT-40, Руководство пользователя, Страница: 19 / 93

Поделиться
Скачать
Amano Time Guardian FRT-40 Скачать руководство пользователя страница 19

Page 2-4 

FPT-40 Fingerprint Terminal Installation & Operation Guide

3.  Upon verification, the 

Green LED

 will momentarily stay on, the 

screen will briefly display your Name, User ID, and the confirmation 
"

Verified.

" (see figure) with the voice prompt "

Thank you

", followed 

by the momentary display of your hours worked (see 

Figure 2-4

) for 

the active pay period. 

Verify

       John Doe
    User ID  00001

        Verified.

Figure 2-7  Validation Screen 

Note:

  The name, assignments, and current pay period information are 

downloaded from Time Guardian to the FPT-40 terminal. 

Note:

  An invalid finger entry will flash the error message,  

"

Please Try Agn.

", with the same voice prompt. The 

Red LED

will momentarily stay on. 

Note:

  When ReCheck Min is set, if an employee punches more than 

once within the time setting [usually 1 – 2 mins.], the voice 
prompt will be "Punch accepted…thank you" and no pay period 
hours will be displayed (see Log Options Menu). 

Punching with a Password (Pwd) 

1.  From the Welcome screen enter your User ID using the keypad  

and press 

OK

 to confirm ID (see figure). 

Figure 2-8  Enter User ID 

Содержание Time Guardian FRT-40






























































































Отзывы:

Нет отзывов