Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 64 / 206

56 Installing Amanda@Work.Place
13. Many older Class 2 fax modems need a string of leading digits ‘1111’ for their fax_id.
By default, Amanda adds these digits.
However, if they appear on the receiving fax machine, change:
fax_id_pad T
To:
fax_id_pad F
14. Change:
faxn
To:
faxn ext
where n is the number for the logical serial port and ext is the extension number
where the fax modem is connected on the telephone switching system (this must be a
single line extension).
15. This defines the maximum number of digits for a local extension. This is used when
the “72” Fax retrieve command is selected so that fax_dl_init (usually ‘9,’) will be
applied only for outside calls.
Change:
max_local_extension 6
To:
max_local_extension n
where n is the maximum number of digits in a telephone extension on your telephone
switching system.
N
OTE
: You don’t need to change the default values for the other serial port and
fax configuration options.
To use the fax modem effectively, you must also use tokens to program
the Extension fields for one or more mailbox. For more information, see
the sections on one and two-call faxbacks in “Chapter 11: Programming
Examples,” in
Administering Amanda@Work.Place .
Suggested Settings
The following modems have been used with Amanda with the following settings. This is
not a comprehensive list, and many other modems work with Amanda. The following
settings are not even guaranteed to work with your modem (even if your modem is one of
those listed) because modem manufactures produce a variety of models and change their
firmware from time to time. However, you may want to try them.
Zoom Modems
fax_flow_control &K3
fax_dl_init -
Aceex Modems
fax_flow_control \Q3 &K3
Practical Peripherals Modems
fax_flow_control X3 &K3