Amanda Amanda@Work.Place Version 3.xx, Руководство по установке

Страница: 110 / 206

102 Installing Amanda@Work.Place
>(file)
Before using this command, you start incremental faxing with the <() command. Even if
the same file is used with the >() command more than once (per incremental fax), it is
faxed only once.
file A string or variable containing a valid DOS file name for the text file to be trans-
mitted. Use the complete path to the file unless the file is in C:\AMANDA.
This command is used only in Extension fields.
Example:
See the <() command.
Failure: Does not fail
0 1
2 3
4 5
6 7
8 9
A B
C D
* #
Literal that plays the DTMF tone corresponding to the specified digit: 0–9, A–D, *, or #
%A
System variable containing the value of the fax_dl_init configuration setting.
Example:
If %A is "9,", a 9 followed by a pause is needed to access an outside telephone line.
%B1 %B2
%B3 %B4
%B5 %B6
System variable that contains the serial number of the corresponding voice board. %B1
is voice board 1, %B2 is voice board 2, etc.
%C
System variable that contains the port number. Each port has its own %C. For example,
if the current caller is on Port 3, %C contains a 3.
%D
System variable that contains the percentage of free disk space. Example:
I(
%D,<,20,171)
causes Amanda to transfer to mailbox 171. In this case, 171 would have Do Not Disturb
ON and Store Messages NO. The caller would hear a greeting that plays a warning about
disk space being low. The Done Chain field would have something like mailbox 999,
the greeting for which is “Thank you for calling. Good-bye.”
%E System variable that contains the contents of the current mailbox’s Extension field. Each
port has its own %E. An Extension field can contain up to 65 characters.
Example:
P(A,%E)
causes Amanda to say the characters in the Extension field.
See the P() command for more information.
ext_no
Series of DTMF digits that indicate an extension number. When these are the first char-
acters in an Extension field (that is, the Extension field does not start with @), Amanda
performs a supervised transfer as shown in
Administering Amanda@Work.Place .
Example:
378
causes Amanda to call extension 378 and supervise the call.
Failure: Invalid extension number
Alphabetical Token Reference (Continued)
Token Syntax Description