®
Amana
Fayetteville, TN 37334
NOTE: It is important to electrically connect the unit and
properly size fuses/circuit breakers and wires in accor-
dance with all national and/or local electrical codes. Use
copper wire only.
Standard Features
• Bi-Flow Liquid Line Filter-Drier (Shipped Loose)
• Front Seating Valves
• Scroll Compressor
• 5 Minute Anti-Short Cycle Protection
• Automatic Reset High Pressure Switch
• Dual Defrost Sensors
• Automatic Reset Loss Of Charge Switch
• Adaptive Demand Defrost
• Spring Loaded Check Valves
• Eight Pole Motor
Accessories
• Fossil Fuel Kit (FFK02A)
• Compressor Sound Blanket (CSB08A)
• Ambient Temperature Kit (ATK05A)
• Hard Start Kit (HSK12A)
• Freeze Protection Kit (FSK01A)
(Installed On Indoor Coil)
NOTE: When mix matching with restrictor orifice indoor
coil, use restrictor orifice part number B1443819 or
11076315, 0.098 diameter.
Heat Pump Performance Data
For ARI Performance Data: See the ARI Directory, Product Data Booklet (PDB), or the product Service Manual.
March 2000
11070191
Above information is for nominal CFM and 70° F indoor dry bulb.
All pressures are PSIG.
All temperatures are °F.
RHE60A2A / BHA60TB002A
Outdoor Ambient Temperature (° F)
65
60
55
50
47
45
40
35
30
25
20
17
15
10
5
0
-5
-10
∆
T
38
36
34
32
30
29
27
25
23
22
20
19
18
16
14
13
11
9
Amps
30.2 27.9 26.1 24.6 23.7 23.2 21.9 20.8 19.9 19.0 18.1 17.6 17.4 16.5 15.4 14.5 13.4 12.0
HI PR
296
284
273
261
255
250
240
231
221
211
203
198
194
187
180
172
166
160
LO PR
75
69
65
60
56
54
50
44
40
36
31
29
28
24
21
17
15
12
Specifications
Cooling Capacity, BTUH (Nominal)
59,500
Compressor
R.L. Amps
28.8
L.R. Amps
169.0
Condenser Fan Motor
Horsepower
1/3
R.L. Amps
2.3
L.R. Amps
3.6
Liquid Line, Inches O.D.
3/8
Suction Line, Inches O.D.
1 1/8
Refrigerant Charge (oz)
288
Power Supply
208/230-60-1
Min Circuit Ampacity
38.2
Max Overcurrent Device
60.0
Electric Conduit Size (in)
Power Supply
1/2 or 3/4
Low Voltage
1/2
Approximate Shipping Weight (Lbs)
345
RHE60A2A
Remote Heat Pump
Specification Sheet
Due to policy of continual product improvement,
the right is reserved to change specifications and
design without notice.
