12
TROUBLESHOOTING
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,
refer to the warranty or visit
http://amana.custhelp.com
. In Canada, visit
http://www.amanacanada.ca
. Contact us by mail with any
questions or concerns at the address below:
In the U.S.A.:
Amana Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Amana Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.-
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Problem
Possible Causes and/or Solutions
Nothing will operate
Power supply cord is unplugged:
Plug into a grounded 3 prong outlet.
Household fuse is blown or a circuit breaker is tripped:
Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
Main or regulator gas shutoff valve is in the Off position:
See the Installation Instructions.
The range is improperly connected to the gas supply:
Contact a trained repair specialist or see Installation
Instructions.
Surface burners
will not operate
Oven is not in Self-Cleaning cyle:
Surface burners will not operate during Self-Cleaning cycle.
The control knob is not set correctly:
Push in knob before turning to a setting.
Air in the gas lines:
If this is the first time the surface burners have been used, turn on any one of the surface
burner knobs to release air from the gas lines.
Clogged burner ports:
See the “Sealed Surface Burners” section.
Surface burner
flames are uneven,
yellow, and/or noisy
Clogged burner ports:
See the “Sealed Surface Burners” section.
Burner caps positioned improperly:
See the “Sealed Surface Burners” section.
Range converted improperly:
If propane gas is being used, contact a service technician or see the
“Warranty” for contact information.
Oven Light
The oven lights are 120 V, 40 W maximum halogen bulbs. They will
come on when the oven door is opened. The oven lights will not
work during the Self-Cleaning cycle.
When the door is closed, touch the appropriate Oven Light keypad
to turn on the oven light.
To Replace:
1.
Unplug range or disconnect power.
2.
Unscrew the oven light globe then grasp the halogen bulb and
pull out.
3.
Replace bulb, using tissue or wearing cotton gloves to handle
bulb. To avoid damage to or decreasing the life of the new
bulb, do not touch bulb with bare fi ngers.
4.
Replace oven light globe by screwing it back into place.
5.
Reconnect power.