bOtH
then the display will be able to indicate both positive and negative values. If set to
POS
the display
will allow only positive values with any values below zero being rounded to zero. If set to
NEG
then the
display will allow only negative values with any value above zero being rounded to zero.
4.75
Channel 2 polarity
Display:
Ch2
Range:
both
,
POS
or
NEG
Default Value:
both
Displays and sets the polarity selection for the display of the engineering value for channel 2. See function
for further information.
4.76
Channel 3 polarity
Display:
Ch3
Range:
both
,
POS
or
NEG
Default Value:
both
Displays and sets the polarity selection for the display of the engineering value for channel 3. See function
for further information.
4.77
Channel 4 polarity
Display:
Ch4
Range:
both
,
POS
or
NEG
Default Value:
both
Displays and sets the polarity selection for the display of the engineering value for channel 4. See function
for further information.
4.78
Channel 5 polarity
Display:
Ch5
Range:
both
,
POS
or
NEG
Default Value:
both
Displays and sets the polarity selection for the display of the engineering value for channel 5. See function
for further information.
4.79
Channel 6 polarity
Display:
Ch6
Range:
both
,
POS
or
NEG
Default Value:
both
Displays and sets the polarity selection for the display of the engineering value for channel 6. See function
for further information.
34 of
LDRSMANADD-2.3-0
