Amadas SPC-4, Руководство пользователя

Страница: 29 / 68

Preparation Hi-Speed Cotton Stalk Puller/Chopper
18 7/1/21 MAN157
Install Blades
1. Determine if the blades are to be installed
for 36", 38", or 40" rows for the SPC-4
(top and middle photo) or 36” or 38” rows
for the SPC-6.
2. Determine which bolt holes to use for the
correct row width.
3. Install the blades with the flat side
pointing toward the tires. The blade cuts
and sharpens itself better with the flat
side "leading." In the following photo,
blades are installed for 40” rows.
4. Install bolts from the flat side of the
blades and torque to 90 ft-lbs.
5. To verify that the blades are in the
correct holes, make sure the center of
each blade is lined up with the
compressed portion of the tires. Refer to
the drawings on the following page for
blade positions.
WARNING
Use caution when tightening the bolts.
The edges of the blades are sharp and if
your hand slips while tightening, you can
seriously cut yourself.