Amada ML-2550A, Руководство по эксплуатации

Страница: 68 / 229

68
ML-2550A/2551A
1. Setting Welding Schedules
DEIONIZED
WATER RES
Displays the insulation level of the secondary cooling water.
CONTROL
DEVICE
Displays the used laser control method.
EXTERNAL CONTROL (external control):
Control is exerted by the PLC connected to the EXT.I/O connector.
PANEL CONTROL (internal control):
Control is exerted by laser controller.
RS-485 CONTROL (external communication control):
Control is exerted by the personal computer connected to the RS-485 (1)
or RS-485 (2) connector.
DELIVERY
SYSTEM
Displays the laser light sharing method such as single delivery, powersharing,
and timesharing.
FIBER
TYPE
SIZE
Selects SI (Step Index) or GI (Graded Index) for the optical fiber type to be
used. Usually, SI is selected.
Sets the core diameter of the applied optical fiber to protect the optical fiber
from excessive incident light to the optical fiber. The setting range is φ0.3 to 1.0
mm.
The maximum value that can be input into the optical fiber is calculated from
the set core diameter in order to restrict the lamp input power.
RESET COUNT
SHOT COUNT
GOOD COUNT
Resets the displayed total number of laser light outputs (SHOT COUNT).
Resets the displayed appropriate number of laser light outputs (GOOD COUNT).
PRESET COUNT
SHOT COUNT
GOOD COUNT
Sets the count-notification function.
When the total number of laser light outputs (SHOT COUNT) or the appropriate
number of laser light outputs (GOOD COUNT) reaches the set number, a
message is displayed.
MAIN UNIT Displays the product model and the software version of the main unit.
PROGRAM UNIT
Displays the product model and the software version of the laser controller.
⇒
For the common items in the upper/lower part of the screen, refer to page 63.