Amada ML-2350A-CE, Руководство по эксплуатации, Страница: 40 / 235

40
ML-2350A/2351A
1. Installation Place
Environment Suitable for Installation and Precautions
⇒ In laser processing, dust and fumes are generated from workpiece. Depending
on the kind of workpiece, they may adversely affect a human body. Also, dust
and fumes from workpiece may cause staining and burning of optical parts
and lower the laser output. Furthermore, if conductive dust enters the laser
equipment, a short circuit accident may occur to cause malfunction. Therefore, in
laser processing, be sure to install an exhaust device such as dust collector and
blower in a proper position to keep a clean environment.
⇒
Use the product in a place where the ambient temperature is 5 to 35ºC and the
ambient humidity is 85%RH or less and yet a sudden temperature change does
not occur. If the humidity is higher than values shown below, condensation may
occur.
30
40
50
60
70
80
90
100
5 10 15 20 25 30 35 40 45 50
Upper limit of ambient humidity
Ambient temperature (ºC)
Humidity (%)
500mm
500mm 500mm
500mm
500mm
MAIN SHUTTER READY HIGH VOLTAGE POWER
6 5 4 3 1 2 ON
OFF
SHUTTER CONTROL
EM
ER G E N OP T S CY