Amada ML-2350A-CE, Руководство по эксплуатации, Страница: 30 / 235

30
ML-2350A/2351A
1. Name and Function of Each Section on the Front Side
Inside of the Front Side
The front door is opened to perform maintenance. Each section of the inside is
explained below.
Function of Each Section inside the Front Side
(1) Power Supply
Terminals
Connects the 3-phase power supply of 400 V AC, and the grounding
conductor. Remove the plastic cover before use.
(2) EXT. I/O (1)(2)
Connectors
Used to output signals, e.g., alarm signals and monitor judgment signals;
and to input signals, e.g., start signal and schedule signals.
(3) EXT. I/O (3)
Connector
Used to input and output Emergency signals.
(4) EXT. I/O (4)
Connector
Used to input and output Emergency signals, and input the external
interlock.
(5) SIGNAL
Connector
BNC connector used to output an analog signal representing the monitor
waveform of laser power. When viewing the waveform of laser output,
connect to an oscilloscope.
(6) RS-485 (1)
Connector
Connects a personal computer or printer to use the external communication
function.
(7) RS-485 (2)
Connector
Connects a personal computer or printer to use the external communication
function.
(1)
(2) (3)
(12)
(5)
(6) (7) (8)
(13)
(11)
(9)
(10)
(4)
INTERLOCK
RS-485(2)
SIGNAL
EXT. I/O(2)
EXT. I/O(3)
EXT. I/O(4)
REMOTE RS-485(1)
EXT. I/0(1)
INTERLOCK
RS-485(2)
SIGNAL
EXT. I/O(2)
EXT. I/O(3)
EXT. I/O(4)
REMOTE RS-485(1)
EXT. I/0(1)