Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 80 / 199

80
MF-C300A-SF/C500A-SF
4 . Setting the Laser Light Output Schedule
4 . Setting the Laser Light Output Schedule
On the SCHEDULE screen, the laser light output schedules are set and registered by
giving SCHEDULE numbers.
If a registered SCHEDULE number is entered, the corresponding output schedules
can be called.
The setting items of laser output time and laser output value are different between
fixed waveform (FIX) and flexible waveform ( FLEX / CW).
SCHEDULE Screen (Fixed Waveform (FIX))
How to see the displayed items
: Settable item
SET POWER
Sets the laser output. Regarding "FLASH1" to "FLASH3", set the ratio (%) sup-
posing that the set value is the reference value (100%). Refer to “REFERENCE
VALUE” for the forecast value of laser output.
<Note>
The settable value of laser output differs depending on the model.
MF-C300A-SF: 30 to 300 / MF-C500A-SF: 50 to 500
MIN The ratio of the preliminary oscillation output for "SET POWER" is displayed.
For the preliminary oscillation, see page 82.

SLOPE
Sets the up-sloping (the laser output becomes gradually stronger) time to
"FLASH1."
After setting "FLASH1", set this time in the range of

SLOPE ≤ FLASH1.
<Note>
The setting and the slope may be different in a low output range of 0 to 50 W.
Check the waveform output on the monitor. To make more detailed settings, use
the FLEX mode.