Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 59 / 199

2 . Checking the Equipment Status
59
MF-C300A-SF/C500A-SF
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
2 . Checking the Equipment Status
STATUS Screen
On the STATUS screen, the laser control method, the laser light sharing specification,
and the total number of laser light outputs can be checked. In addition, the error log,
event log, and software version can be checked.
How to see the displayed items
: Settable item
CONTROL
DEVICE
Displays the used laser control method.
EXTERNAL CONTROL (external control):
Control is exerted by the PLC connected to the EXT. I/O connector.
PANEL CONTROL (internal control):
Control is exerted by laser controller.
RS-485 CONTROL (external communication control):
Control is exerted by the personal computer connected to the RS-485 (1)
or RS-485 (2) connector.
DELIVERY
SYSTEM
Displays the laser light sharing method.
SHOT COUNT
GOOD COUNT
Resets the displayed total number of laser light outputs (SHOT COUNT).
Resets the displayed appropriate number of laser light outputs (GOOD COUNT).
Pressing the RESET button resets the value to 0.
LD WORK TIME Displays the LD total time.
FLASH WORK
TIME
Displays the laser output time.
Laser Unit Info . Displays the temperature (CABINET TEMP.) and humidity (CABINET HUM.) in-
side of the laser unit, and installation environment temperature of the laser main
unit (SURROUND TEMP.).
Ext . I/O Displays the TERMINAL MONITOR screen. Then, the external input/output
monitor is displayed.
ERROR LOG Displays the ERROR LOG screen. Then, the error history is displayed.
EVENT LOG Displays the EVENT LOG screen. Then, the event history is displayed.