background image

AP502, AP502T Instructions

The Netherlands

AM NL

Ambachtsweg 37

NL-3899 AM

Zeewolde

United States

AM USA

888 Garfield

P.O. Box 21710

Eugene, OR 97402

1.  Remove plane pieces from packaging. Turn fuselage upside 

down to access underside. 

 

NOTE: When turning plane during assembly take care to 

set it gently on a soft surface. Soft material can be placed 

under Fuselage to elevate body of plane and take weight off 

of fragile protruding parts during assembly.

Landing Gear

2.  Set pegs in Landing Gear struts ends into holes on Fuselage 

underside (crossed lines should face toward plane front) and 

secure using 8 small screws 

(A) (Fig. 1).

Lower Wings

3.  Set Wing Struts into slots in top of Left and Right Lower Wings with 

notches in Struts facing toward tapered rear edge of wing. (Loops on Struts 

should face away from wing tips and Strut tops should tilt forward.) Secure 

using 2 medium screws 

(B) set into holes in each wing underside (Fig. 2).

4.  Matching slots on inner edge of Lower Wings to pegs on Fuselage, push 

Wings inward until flush with Fuselage sides. Secure Wings with 2 medium 

screws 

(B) set in holes on inner underside of each Wing (Fig. 1).

Upper Wings
5.  
One Upper Wing is connected to Center Wing. Matching pegs in 

remaining Upper Wing to slots in Center Wing/Upper Wing, push together 

to complete Upper Wing. Secure with 2 medium screws 

(B) set in holes in 

Center Wing underside

 (Fig. 3)

09/10  83000164

Hardware provided:

 

8 small screws 

(A)

 

18 medium screws 

(B)

Required for assembly:

 

Small Phillips screwdriver

 

6.  Turn plane right side up. Set slots 

in underside of Upper Wing over 

top ends of Struts. Secure with 

medium screws 

(B) set into holes in 

top of Upper Wing.

Lines

7.  Untie and separate lines before 

attachment. Hook lines from rear 

Fuselage Struts to loop on each 

lower rear Wing Strut. 

 

Hook lines from forward Fuselage 

Struts to loop on each lower 

forward Wing Strut. 

8.  Hook lines from Lower Wings to 

loops on each upper rear Wing 

Strut.

9.  Hook lines from Landing Gear to 

each upper forward Wing Strut.

10.  Hook lines from Lower Wing 

Ailerons to loops on each Upper 

Wing Aileron.

(B)

(B)

(B)

(B)

(B)

(B)

(A)

Left Lower Wing

Landing Gear

Left Lower Wing

Right Lower Wing

Left Upper Wing

Right Upper Wing

Center

Wing

Fuselage

Fuselage

Wing Struts

Fuselage

Struts

Aileron

Aileron

(Fig. 1)

Underside

View

Left Lower Wing

(B)

Wing 

Struts

(Fig. 2)

Top 

View

(Fig. 3)

Top 

View

Отзывы: