4
Preparation
Assembling the detector
Assembling your detector is easy and requires no special tools. Just follow these steps.
1) Unscrew the fixing knob on the search coil and remove the knobs and the connector.
Insert the smaller stem and align the holes on the search coil bracket and the stem.
Push the connector through the holes and tighten the knob.
2) Loosen the stem’s lock nut (connected with the handle) in the direction of the arrow.
Then insert the smaller stem into the big stem connected with the handle. Turn the
stem’s lock nut in the reserve direction of the arrow to lock it in place.
3) Insert the latch on the top of the handle into the assembly hole on the bottom of the
control box. Then slightly push the control box in the direction of IN marked on the
handle to fix the latch in place.
4) Tighten the fixing screw.
5) Insert the search coil cable plug into the five-pin jack on the front control box’s
housing.
Fixing Screw
Latch
Control Box
Assembly Hole
Lock nut
