6.
Assembly Steps – CG Adjustment
Step 1.
Release the Top Stand Plate and prepare your own
GoPro or cameras with similar weight. Use double-
sided foam tape to secure the GoPro in the center of
the Bottom Stand Plate.
Step 2.
Adjust the position of the Camera to the center axis of
Tilt Motor.
Step 3.
Secure the GoPro by installing the Top Stand Plate
back to the Stand Frame Mount using 4pcs M2x6mm
Screws.
(Apply little amount of Thread Locker when
securing screw to metal parts.)
Step 4.
Adjust the balance point of the Roll Axis by loosing
two M2.5x6mm Screws on the Roll Motor as to move
the Roll TR Coupler to left or right side.
(Make sure
the GoPro stay level which indicate the correct CG
position. This is very important for steady operation
of the Gimbal.)
Page 12 of 16
