MR-RQ Installation Guide
MR-RQ Installation Guide
7 of 12
102-000031- IG071719-B.0
10
Adjust fixture to desired angle
11
Tighten set screws
13
Cut excess cable/fasten cable gripper
Tighten set screws on connector to secure both
fixtures with provided 5/64" hex key. Make sure the
joints are properly aligned.
Adjust lengths of suspension cables at all locations
on fixture to rotate it at desired angle. Maximum
rotation of joint is 20°.
Cut excess suspension cable and sfirmly tighten
cable gripper cap .
12
Install indirect cover plates
Install indirect cover plates on center brackets by
fastening provided 6-32 screws.
Raise wiring and canopy assembly to J-box. Refer to
final/record drawing to make wiring connections.
Ensure
Power is OFF
prior to connecting wiring.
14
Raise Canopy to Ceiling
Mount Canopy Bracket to J-Box using provided screws,
then secure Canopy over J-Box with finial.
CAUTION:
Do
not pinch wire connections.
15
Mount Canopy Bracket to J-Box & Secure Canopy
